Xhorse VVDI2 Complete BMW Software Activation
Buy this package, you will get a full BMW-activated Software List:
1) VB-01 BMW OBD
2) VB-02 BMW CAS4
3) VB-03 BMW FEM / BDC
Note:
1. After you pay, please provide the serial number of your VVDI2, and we will open it for you within 24 hours.
2. No device, no need for shipping, only authorization service.
3. If you need VAG Authorization, please check
here.
4. If you need Toyota Authorization, please buy
XH-TOHCAU.
5. If you need VVDI2 BMW Full function device, please buy
XH-VVDI2F on our site.
Functions of VVDI2 BMW:
Unit coding
OBD key learn(CAS1 / CAS2 / CAS3 / CAS3 + )
File Make Key(CAS1 / CAS2 / CAS3 / CAS3+ / CAS4 / CAS4 + )
mileage correction,
read & write EWS / CAS EEPROM
synchronize DME-CAS, synchronize CAS-ELV
unlock key
CAS repaired etc
Fix CAS4 EEPROM key programmer
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control
VVDI2 BMW FEM / BDC Function Authorization
VVDI2 - BMW FEM / BDC system(function released and available, just no user manual)
Users can refer to the following information (3 steps for make keys: get key info-> programming FEM / BDC system-> make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2. support reset FEM / BDC KM(cluster requires reset manually)
3.support erase key(after erase the key position become blank position)
4. support backup coding
5. support restore coding
Notes:
1. backup coding and restore coding can direct operation generally.
2. add keys, reset KM, and erase key must program FEM / BDC system first
3. in FEM / BDC interface, if the ' get key info' type is not supported, it will show: the customer should use the " BMW E-sys software" program FEM / BDC system.
then programming FEM / BDC system with VVDI2-BMW
4. when an operation on the ' programming FEM / BDC system' interface, please don' t close this software window until all procedures are completed.
5. programming FEM / BDC system, requires soldering and getting EEPROM.(FEM 95128 chip, BDC 95256 chip)usually, there are 2 same chips on the module,
please refer to the software diagram, and select the correct one.
6. programming FEM / BDC system, must restore the original eeprom, and restore coding. if cannot restore the coding or after restoring the coding assemble FEM / BDC module back to the car,
but with a problem(such as the remote control cannot start the car
or the car with a window problem)please use " BMW E-sys software" coding for FEM / BDC system
you
7. if connect power to FEM / BDC module, but the relay keeps ringing, please contact technical support for help. usually, operation on FEM / BDC should be ok, just need to program.
VVDI2 BMW FEM / BDC Function Authorization
VVDI2 - BMW FEM / BDC system(function released and available, just no user manual)
Users can refer to the following information (3 steps for make keys: get key info-> programming FEM / BDC system-> make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2. support reset FEM / BDC KM(cluster requires reset manually)
3.support erase key(after erase the key position become blank position)
4. support backup coding
5. support restore coding
We are here for you:Email: Sales@XhorseShop.usWhatsapp: +86-18205996549Skype: Sales@XhorseShop.us