Xhorse VVDI Multi-Prog Programmer and Xhorse VH24 SOP44 & TSOP48+VH29 EEPROM & FLASH+VH30 SOP44+VH31 TSOP48 Adapters

Xhorse Multi-Prog Programmer and Xhorse VH24 SOP44 & TSOP48+VH29 EEPROM & FLASH+VH30 SOP44+VH31 TSOP48 Adapters

Package Includes:
Xhorse Multi Prog Full Set
Xhorse XDMPO4GL VH24 SOP44 & TSOP48 Adapter work with Multi-Prog
Xhorse XDMPO5GL VH29 EEPROM & FLASH Adapter for 8 pin Chip
Xhorse XDMPO6GL VH30 SOP44 Solder Free Adapter
Xhorse XDMPO7GL VH31 TSOP48 Solder Free Adapter MULTI PROG

What is the new feature of Multi-Prog?

• Multi-Prog is with MQB48 license/ BMW Bench Read ISN, bind with Xhorse VVDI2/ key tool plus account, then your Key Tool Plus/ VVDI2 can use MQB48 function. (But please note key tool plus not shows MQB48 NEC35XX license activated, it can use Multi Prog to read NEC35XX data, KTP load data to add new key, if you want to use key tool plus to read NEC35XX directly, still need to buy NEC35XX license to activate)
• Full replace VVDI Prog Programmer.
• Newest Software Version: V1.0.9.0, Firmware V1.1.5
• Newly support ECU TCU Clone. Adds Vehicle Engine Data Calculation and Processing (MEDC17, EDC17).
• Adds checksum correction function.
• Adds data comparison function.
• Support to write ISN.
• Free Download Xhorse Multi-Prog Software
• Free Download Xhorse Multi-Prog User Manual

Xhorse MULTI-PROG Pro-level programmer is a reading and writing device for automotive chips, electronic modules, especially ECU modules. It integrates the programming, reading, writing and cloning functions of common automotive MCUs, automotive memory chips, common electronic modules and automotive ECU boards.

Multi-PROG Pro-level programmer supports batch writing of chips, and batch writing of chips is often used in factories when production requires large-scale writing of chips. The types of writes supported are common memory series and common microcontroller series. For the specific usage of batch writing, please refer to the documentation of the factory usage mode that comes with the software.

Batch programming function: Multi-PROG devices support factory usage mode for batch programming of chips. In this mode, the functions of batch programming, offline programming, and file offline programming can be realized. The main difference between Xhorse VVDI PROG programmer and Xhorse MULTI-PROG Pro-level programmer is that MULTI-PROG Pro-level programmer has the batch programming function but VVDI PROG programmer does not.

Xhorse VVDI Multi Prog Functions:

1. Read, Write and Clone ECU

BMW B48/ B58 reading ISN
BMW MSD80/ 81/ 85/ 87/ MSV90
Mercedes-Benz SIM271
BMW MSV80 VW BOSCH MED17 Series ECUo
BMW N13/ N20/ N55/ B38/ TC17X
Support Marelli.Siemens.Delphi and other ECU manufacturers

2. Read, Write and Clone TCU

Volkswagen Audi Skoda DQ200, DQ250, VL381 TCU etc.
Porsche DL501 TCU
Ford Dodge and other MPS6 series TCU
BMW DKG, Mercedes-Benz VGS and other models TCU

3. Vehicle Engine Data Calculation and Processing

MED17/ EDC17 data processing

4. Support Flexible Extension of Third-party Plug-ins
Support the development of third-party plug-ins and provide data processing and modification services

5. Read Write MCU
Support reading and writing MCU of various brands including Renesas, Motolora, NXP, Infineon, etc.
Support certain encrypted chip reading and writing

6. Read Write Vehicle Immo Module Support Porsche, LandRover, Mercedes-Benz EZS, VOLVO, VW MQB dashboard, AUDI BCM2,etc.
Support modules including BMW EWS, CAS1/ CAS2/ CAS3/ CAS4+, FEM BDC.etc.
Support other common immo modules

Note: Compatible with Xhorse solder-free adapters and cables

7. Read & Write EEPROM Support EEPROM and FLASH

8. Read Write Vehicle Dashboard

Support dashboard of VW, Honda, Hyundai, Kia .etc.

---

We are here for you:

Email: Sales@XhorseShop.us
Whatsapp: +86-18205996549
Skype: Sales@XhorseShop.us