Using XT27 Super Chip and Xhorse VVDI Mini Key Tool, Ford 60 Generic 4D key cloning is successful.

1. Use the original key to read the transponder Place the original Ford key on the coil location of the Mini Key Tool Select ‘Transponder Clone’ and ‘Read Transponder’
Identify the key type as transponder 4D+ (60)


2. Create a transponder with VVDI Super Chip XT27 Remove the original key and insert the xt27 super chip into the coil

Select ‘Create Transponder’

Choose ID60~ID70 (40 bits)>> 60-Generic>> 60-Generi Transponder: VVDI XT27 Texas Crypto TIRIS 4D>> Create

Transponder creation successful

3. Copy the Ford 4D key with VVDI XT27 Enter the Transponder Copy function interface

Remove the super chip and place the original key on the detection coil of the VVDI Mini Key Tool to read the transponder again

Then insert the super chip x27 into the coil

Select Copy>> Begin copy

It will finish all steps: identify>> Sniffer data>> Upload>> Compute>> Query

Data upload successful

Query result shows success

Copy complete