By carefully following the step-by-step instructions below, locksmiths of all skill levels can acquire the proficiency needed to confidently cut laser keys using Xhorse dolphin xp007 manual key cutting machine.

Tools required：

• Xhorse dolphin xp007 with clamp attached
• An original Honda laser key
• A brand-new key
• EIS

Procedures:

1. Prepare the original Honda laser key and insert it into the clamp on the right side. Calibrate the key and securely fasten it.

 

2. Take the new Honda laser key and insert it into the clamp on the left side. Calibrate the key and ensure it is securely fastened.

 

3. Switch on Xhorse xp007 and position the probe towards the new key. Begin the cutting process.

4. After cutting, clean the fixture to remove any debris or residue.
5. Take the newly cut key and proceed to cut the other side.

6. Once both sides are cut, the cutting process is complete.
7. Clean the fixture once again to ensure it is free from any debris.
8. Insert the new laser key into the EIS to test its functionality.

 

9. Congratulations! You have successfully cut and tested the new laser key. The process is now complete, and you are done.

Users please remember to follow the manufacturer's guidelines and ensure all safety precautions are taken while operating Xhorse Dolphin XP007 Manual Key Cutting Machine.


Xhorse dolphin xp007 user manual

• https://mega.nz/file/nMMRlIzT#VJxqTRXUzS_wTFw_MUqP4QqMIIwGQDBFZRlbt3So1TY
• No password